Cantilever Double-Pitch Tunnel Without Pillars

You are here:

Home
Polycarbonate canopies
Swinging canopies
Cantilever Double-Pitch Tunnel

Cantilever Double-Pitch Tunnel

Double-pitch swing tunnel is a modern and linear solution to protect the entrances and, in the multiple version, also facades and windows; in the standard version and in the indicated sizes it does not need support pillars.

Request more information

Description

It is characterized by extreme versatility and modularity in terms of width, in the standard version and in the measures indicated it does not need support pillars; it is therefore the ideal solution for the protection of entrances, facades and windows, in both modern and classic buildings, intended for residential and industrial use; also supplied as an ASSEMBLY KIT or ASSEMBLED. The same modules, in the multiple-sector version, can be made of larger dimensions, supported by appropriately dimensioned rectangular beams.
Made with aluminium extrusions profiles (col. RAL 9010 White / 6005 green / 8017 brown / 3000 red / 7016 gray / 9006 silver / 9005 matt black / ANTIQUE GREY), complete with gutter channel, any tie rods or brackets of support and wall fixing plates (excluding downpipes); cover with sheets in solid UV-protected polycarbonate (colour CLEAR / OPAL / BRONZE).
DF3 – characterized by 30°

Voci di capitolato

DOUBLE-PITCH TUNNEL (springing angle 30°) made as follows:

Metal completion frame in anodised / RAL-painted aluminium extrusions, complete with:

Ribs type X1M / X3M, with Y joint, dim. mm. 50/70 x 15/18, designed for insertion of double gaskets;
Sheet-retaining flat bars type X4P / X3P, dim. mm. 50/70 x 5, designed for insertion of double gaskets;
Gaskets in ethylene-propylene based compound, black colour, Shore hardness 65 ± 5, type GSP3EC (g/m 55 approx.) / GSP8EC (g/m 130 approx.) / GSP5EC (g/m 80 approx.);
Side and/or intermediate Gutter channel in extruded XCANP type complete with XMOB type sheet-retaining profile, with variable angle joint, with dedicated joint for adjusting the springing angle, complete with appropriate section angle profile acting as a pressure bar; the gutter channel will be complete with aluminium closing caps, th. 30/10;
Shaped wall anchoring plates, complete with special concealed joints for fixing the XCANP gutter channel;
Any support tie rods and related accessories in stainless steel AISI 316;
Any support brackets in aluminium extrusions / hot-dip galvanised and painted carbon steel, of appropriate section according to size;
Profiles of aluminium extrusions with an appropriate angle, complete with ridge and under-ridge sheet metal flashings;

Covering with sheets in:

Solid coextruded UV-protected polycarbonate, thickness suitable for bending radius and rib spacing, colour CLEAR / OPAL / BRONZE, inserted with free sliding; fire reaction Class Bs1d0.

Variable rib spacing according to dimensions.

Modelli e dimensioni

CANTILEVER DOUBLE-PITCH TUNNEL	L	H
F3DF/1	up to 1300	max mm 375
F3DF/2	from 1301 to 1700	max mm 500
F3DF/3	from 1701 to 2000	max mm 600

Dimensions in mm. – P = rib spacing

Download

SCHEDA-TECNICA-TUNNEL-DF (PDF)