You are here:
  1. Home
  2. Polycarbonate canopies
  3. Wall decals for gates
  4. Arched Tunnel for Small Gates

Arched Tunnel for Small Gates

  • Rendering of the small gate arched in aluminium anthracite with polycarbonate bronze
  • Cancellettor arched in aluminium grey above l'entrance of a condominio, with cassette postali and cancellor driveway
  • Cancellettor arched in aluminium black installed above l'entrance pedonale of a condominior with cassette postali
  • Detail of the small gate arched Poliplast colour bronze installed su un pilastror in mattoni, with targhetta of the marchior visibile
  • Rendering of the small gate arched in aluminium anthracite with polycarbonate bronze
  • Cancellettor arched in aluminium grey above l'entrance of a condominio, with cassette postali and cancellor driveway
  • Cancellettor arched in aluminium black installed above l'entrance pedonale of a condominior with cassette postali
  • Detail of the small gate arched Poliplast colour bronze installed su un pilastror in mattoni, with targhetta of the marchior visibile

Arched Tunnel for Small Gates

Arched tunnel for small gates is designed to protect pedestrian entrances. The complete system includes ribs and cover sheets, to be integrated with longitudinal sheet-retaining profiles, any gutter channels and the load-bearing and/or raised structure, if required. The system can also be supplied as an ASSEMBLY KIT.

Request more information

Description

Designed for the protection of entrance gates. The complete system includes the ribs and cover sheets, to be integrated with the longitudinal sheet-retaining profiles, any gutter channels. A load-bearing and/or raised structure is also possible (in the absence of adequate wall supports) with relative fixing plates and concealed joints. The system can also be supplied as an ASSEMBLY KIT and, where the size allows, ASSEMBLED.
Made with aluminium extrusions profiles (col. ox electrocolour BLACK / SILVER, RAL 9010 White / 6005 Green / 8017 Brown / 3000 Red / 7016 Grey / 9006 Silver / 9005 matt black / ANTIQUE GREY); cover with sheets colour CLEAR / OPAL / BRONZE.
Versions: LOW-RISE ARCH VERSION – characterized by the chord/rise ratior = 1/3 – 1/5
Possible solution FULL ARCH VERSION, characterized by the chord/rise ratior = 1⁄2, on request

TUNNEL for entrance gate cover: low-arched / full arch arched made as follows:

Metal completion frame in anodised / RAL-painted aluminium extrusions, complete with:

  • Ribs type X1M / X3M, with Y joint, dim. mm. 50/70 x 15/18, designed for insertion of double gaskets;
  • Sheet-retaining flat bars type X4P / X3P, dim. mm. 50/70 x 5, designed for insertion of double gaskets;
  • Gaskets in ethylene-propylene based compound, black colour, Shore hardness 65 ± 5, type GSP3EC (g/m 55 approx.) / GSP8EC (g/m 130 approx.) / GSP5EC (g/m 80 approx.);
  • X10 / X13 / XMOB / X13 / twor variable angle hinged elements, with dedicated joint for setting the springing angle, or type XMDLAT / T80X20X2RIF for holding sheets with cantilevered ribs, complete with appropriate section angle profile acting as a pressure bar;

Alternatively:

  • Side and/or intermediate Gutter channel in extruded type XCANP / XCANG complete with XMOB type sheets containment profile, with dedicated joint on both sides for adjusting the springing angle. The gutter channel will be complete with special concealed joint elements, superimposed to ensure the perfect water seal and aluminum sp closure caps. 30/10;

Load-bearing structure in aluminium extrusions anodised / painted RAL:

  • 84 x 84 with rounded edges, with special hollows for inserting concealed joint type XINN52.
  • XINN52 type joint, for XCANP / XCANG or XPIL edge beam mounting;
  • Fixing sheets in aluminium, of a suitable size, assembled with XINN59 type joint or fittingly dimensioned pipe fitting, for fixing of XPIL pin;

Covering with sheets in one of the following alternatives:

  1. Solid coextruded UV-protected polycarbonate, thickness suitable for bending radius and rib spacing, colour CLEAR / OPAL / BRONZE, inserted with free sliding; fire reaction Class Bs1d0.
  2. Multiwall coextruded UV-protected polycarbonate, thickness suitable for rib spacing, colour CLEAR / OPAL / BRONZE, inserted with free sliding; fire reaction Class Bs1d0.

 

LOW ARCHABL
CANC3/1up to 1500max mm 450up to 2000
CANC3/2from 1501 to 1700A/3 ca.up to 2000
CANC3/3from 1701 to 2200A/3 ca.up to 2000

Dimensions in mm. – P = rib spacing, L = lunghezza

Description

Designed for the protection of entrance gates. The complete system includes the ribs and cover sheets, to be integrated with the longitudinal sheet-retaining profiles, any gutter channels. A load-bearing and/or raised structure is also possible (in the absence of adequate wall supports) with relative fixing plates and concealed joints. The system can also be supplied as an ASSEMBLY KIT and, where the size allows, ASSEMBLED.
Made with aluminium extrusions profiles (col. ox electrocolour BLACK / SILVER, RAL 9010 White / 6005 Green / 8017 Brown / 3000 Red / 7016 Grey / 9006 Silver / 9005 matt black / ANTIQUE GREY); cover with sheets colour CLEAR / OPAL / BRONZE.
Versions: LOW-RISE ARCH VERSION – characterized by the chord/rise ratior = 1/3 – 1/5
Possible solution FULL ARCH VERSION, characterized by the chord/rise ratior = 1⁄2, on request

TUNNEL for entrance gate cover: low-arched / full arch arched made as follows:

Metal completion frame in anodised / RAL-painted aluminium extrusions, complete with:

  • Ribs type X1M / X3M, with Y joint, dim. mm. 50/70 x 15/18, designed for insertion of double gaskets;
  • Sheet-retaining flat bars type X4P / X3P, dim. mm. 50/70 x 5, designed for insertion of double gaskets;
  • Gaskets in ethylene-propylene based compound, black colour, Shore hardness 65 ± 5, type GSP3EC (g/m 55 approx.) / GSP8EC (g/m 130 approx.) / GSP5EC (g/m 80 approx.);
  • X10 / X13 / XMOB / X13 / twor variable angle hinged elements, with dedicated joint for setting the springing angle, or type XMDLAT / T80X20X2RIF for holding sheets with cantilevered ribs, complete with appropriate section angle profile acting as a pressure bar;

Alternatively:

  • Side and/or intermediate Gutter channel in extruded type XCANP / XCANG complete with XMOB type sheets containment profile, with dedicated joint on both sides for adjusting the springing angle. The gutter channel will be complete with special concealed joint elements, superimposed to ensure the perfect water seal and aluminum sp closure caps. 30/10;

Load-bearing structure in aluminium extrusions anodised / painted RAL:

  • 84 x 84 with rounded edges, with special hollows for inserting concealed joint type XINN52.
  • XINN52 type joint, for XCANP / XCANG or XPIL edge beam mounting;
  • Fixing sheets in aluminium, of a suitable size, assembled with XINN59 type joint or fittingly dimensioned pipe fitting, for fixing of XPIL pin;

Covering with sheets in one of the following alternatives:

  1. Solid coextruded UV-protected polycarbonate, thickness suitable for bending radius and rib spacing, colour CLEAR / OPAL / BRONZE, inserted with free sliding; fire reaction Class Bs1d0.
  2. Multiwall coextruded UV-protected polycarbonate, thickness suitable for rib spacing, colour CLEAR / OPAL / BRONZE, inserted with free sliding; fire reaction Class Bs1d0.

 

LOW ARCHABL
CANC3/1up to 1500max mm 450up to 2000
CANC3/2from 1501 to 1700A/3 ca.up to 2000
CANC3/3from 1701 to 2200A/3 ca.up to 2000

Dimensions in mm. – P = rib spacing, L = lunghezza

Request more information

We are available for any information or assistance requests.
Fill out the contact form to send us an email or visit our shop to purchase directly online!

    You might also be interested in:

    Canopy Moon with profile curved a lente, structure in aluminium grey and supporti a parete su sfondor white

    Moon Canopy

    Read more
    Rendering of the tunnel Giglior in aluminium green with profile a più arches sovrapposti

    Giglior Model Tunnel

    Read more
    Rendering of the tunnel cantilever arched T3 in aluminium silver with vetrata azzurra

    Cantilever Arched Tunnel

    Read more
    Double-pitch tunnel for small gates

    Double-Pitch Tunnel for Small Gates

    Read more
    Tunnel arched in polycarbonate green acqua, vista scontornata

    Arched Tunnel

    Read more
    Rendering of the canopy Elettra in aluminium green scuror with uprights traforati a motivor a foglia

    Elettra Canopy

    Read more
    Structure in aluminium of the tunnel a double-pitch vista of profile, without pannelli of cover

    Double-Pitch Tunnel

    Read more